[ad_1]
Final month, Flyfish despatched me just a few of their latest frames to check out. On this put up, I’ll share my insights on these frames, specializing in their design functions and issues. The brand new additions embrace the Tony 5, Atlas 4, and Fifty 5.
New to FPV? Try my purchaser’s information about FPV drone frames: https://oscarliang.com/fpv-drone-frames/
Tony 5: Extremely Mild 5-inch Body
The place to Purchase?
Get the Tony5 body from these distributors:
What’s Particular?
The Tony 5 stands out as essentially the most fascinating body among the many three we’re going to discuss at this time, primarily as a result of its ultra-lightweight design. Weighing simply over 58g, it’s the best body for constructing a sub-250g 5-inch drone—an important weight restrict in some international locations earlier than requiring a drone license.
My earlier try at constructing an ultralight 5″ drone, the BetaFPV X-Knight, confronted challenges with vibrations regardless of its energy and agility. I plan to switch its elements to the Tony5, hoping for improved efficiency.
Design and Construct High quality
The Tony5 body options notably skinny arms, contributing to its light-weight but sacrificing sturdiness towards crashes. This isn’t the body for bando fashion flying and bashing.
The arms are 4mm thick, with high and backside plates at 2mm. FlyfishRC’s consideration to element is clear within the rounded edges of all carbon fiber elements, enhancing construct high quality and dealing with.
Regardless of its rigidity and ease of meeting, the supply of spare elements appears restricted to full-frame purchases – I can not discover spare arms out there on their web site.
The body is designed for sub-250g builds with out compromising on options, providing compatibility with DJI O3 and all micro-size FPV cameras. Nonetheless, attaining the sub-250g weight could also be extra possible with an analog setup. The body helps 20×20 and 25.5×25.5mm flight controller stacks, excluding 30x30mm choices.
Atlas 4: Lengthy Vary 4-inch Body
The place to Purchase?
Get the Atlas 4 body from these distributors:
What’s Particular?
The Atlas4, just like the Flywoo Explorer, is a light-weight 4-inch body designed for lengthy vary.
It stands out with its roomy physique, permitting simpler part becoming with out the constraints confronted by the Explorer. It additionally helps bigger 25.5×25.5mm flight controllers, in addition to 20x20mm stacks, however not 16x16mm stacks.
Weighing 51g, the Atlas 4 is kind of a bit heavier than the Explorer’s 42g, an element to contemplate for sub-250g builds. 9 grams might not sound loads, however it makes the distinction whether or not or not you may make it underneath 250g. With this Atlas 4, you might need to search out methods to optimize weight, maybe utilizing smaller batteries and sacrifice some flight time.
When you aren’t too fussy about weight however simply need extra inside house to mount your elements, the Atlas4 is a perfect selection. It helps the DJI O3 in addition to different giant VTXs, whereas additionally accommodating 25.5×25.5mm AIO flight controllers.
Fifty 5: The Refined Volador?
The place to Purchase?
Get the Fifty 5 body from these distributors:
What’s Particular?
The Flyfish Volador frames impressed with their construct high quality and worth, but their weight was a significant concern for me personally. The brand new Fifty5 body addresses this, matching the favored TBS SourceOne V5 at round 130g with out compromising the premium construct high quality. It options chamfered carbon fiber edges and consists of precious 3D printed elements for an enhanced consumer expertise. I usually don’t use all 3D printed elements as I attempt to maintain the burden to a minimal, however it’s nice to have choices.
Simplifying the design barely, the Fifty5 now shares an analogous design because the SourceOne V5, permitting simpler meeting and repairs whereas sustaining sturdiness and stiffness with much less materials use.
Sadly I’ve gifted each of my Volador builds to my patrons (What? You didn’t know I’ve patreon? Be a part of now!), so I can’t do a facet by facet comparability. I sit up for constructing the Fifty 5 with new elements within the upcoming months. Keep tuned for the construct logs 🙂
[ad_2]